If this post helps you unbrick your device , Please consider inviting your friend's to like our fan page androidtricks by going here https://www.facebook.com/pages/Androidtricks/548255795268831 , so that your friend's may need help in future and we'll feel happy to help them.
So, you've broken a rom and xRecovery wont start? Given up... dont!
I suppose it has pretty much every other use case.
Without futherado heres the guide:
All you need to do is in 7 easy steps.
What you Need:
Flashtool 0.2.5
A Stock Rom FTF file (for now)
If you are not sure download the GENERIC version for your device.
1: Unzip Flashtool to your desktop
2: Place ftf rom file in %desktop%/FlashTool/firmwares
3: Run FlashTool.exe, Click the Flash button and select the Firmware you downloaded.
4: When Prompted to connect your phone in flashmode. Hold the back button, and plug your phone in to the computer to connect in FlashMode. The LED will go green, if it doesn't, turn your phone off again and try again! or come here for help.
5: Press OK
6: Wait 15 minutes. Make yourself a coffee or beer
7: Now your phone should be stock. You should be crying and happy at the same time.
BONUS STEP: for easy root, turn on phone and open flash tool (connect phone.) and press ROOT (make sure you have USB Debugging enabled)
So, you've broken a rom and xRecovery wont start? Given up... dont!
I suppose it has pretty much every other use case.
Without futherado heres the guide:
All you need to do is in 7 easy steps.
What you Need:
Flashtool 0.2.5
A Stock Rom FTF file (for now)
If you are not sure download the GENERIC version for your device.
1: Unzip Flashtool to your desktop
2: Place ftf rom file in %desktop%/FlashTool/firmwares
3: Run FlashTool.exe, Click the Flash button and select the Firmware you downloaded.
Quote:
Originally Posted by Helpful Hint
Be Sure that your phone is off before connecting in flashmode, or it wont turn green.
|
5: Press OK
Quote:
If you receve an error, please open the 'drivers' folder (%desktop%/flashtool/drivers/) and run the exe file. to install the flash driver, once installed. try step 3-5 again! |
7: Now your phone should be stock. You should be crying and happy at the same time.
BONUS STEP: for easy root, turn on phone and open flash tool (connect phone.) and press ROOT (make sure you have USB Debugging enabled)
Comments
Post a Comment